BFXCY - C & H AERIAL FIXER HARDENER, PART B

  • MSDS: BFXCY
  • Manufacturer: CLAYTON CHEMICAL CO
  • Product Name: C & H AERIAL FIXER HARDENER, PART B
  • National Stock Number: 6750-00-929-8101
Product Identification

Product ID:C & H AERIAL FIXER HARDENER, PART B
MSDS Date:02/15/1991
FSC:6750
NIIN:00-929-8101
Kit Part:Y
MSDS Number: BFXCY

Responsible Party
CLAYTON CHEMICAL CO.
13310 S. FIGUEROA STREET
LOS ANGELES, CA 90061
US

Emergency Phone: 310-538-9530/800-424-9300(CHEMTREC)

Info Phone: 310-538-9530

Preparer: JOHN B. TAYLOR

Cage: 61803

Contractor
CLAYTON CHEMICAL CO., A DIV OF VARICHEM CORP
276-Z HEATHSVILLE, VA 22473 US

Telephone: 703-759-9399

Cage: 6W820

Ingredients

ALUMINUM SULFATE (SARA III)

CAS: 10043-01-3

RTECS: BD1700000

Fraction By Weight: 40-50%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 62%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MATERIAL IS CORROSIVE, CAUSE
IRRITATION & SEVERE EYE BURNS ON CONTACT; IF INGESTED, CAUSE SEVERE
STOMACH PAIN AND UPSET.
Effects of Overexposure:EYES:VAPORS,LIQUID OR MIST MAY CAUSE SEVERE
IRRITATION & BURNS.MAY DAMAGE THE EYES WITH PERMANENT INJURY
POSSIBLE; INHALATION:VAPORS OR MIST MAY RESULT IN
BRONCHITIS,PULMONARY EDEMA,AND CHEMICAL PNEUM ONITIS;
INGESTION:LIQUID WILL BURN MOUTH & THROAT CAUSING SEVERE ABDOMINAL
PAIN,NAUSEA,COLLAPSE.MAY CAUSE DEATH.
Medical Cond Aggravated by Exposure:NOT KNOWN

First Aid

First Aid:EYES:FLUSH WITH PLENTY OF WATER & CALL A PHYSICIAN; SKIN:WASH
WITH SOAP & WATER; INGEST:DRINK MILK, MILK OF MAGNESIA & WATER,
CALL A DOCTOR IMMEDIATELY.

Fire Fighting

Flash Point:NONE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRES.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:EXTREME HEAT OR FIRE MAY CAUSE EMISSION
OF HAZARDOUS DECOMPOSITION PRODUCTS.

Accidental Release

Spill Release Procedures:SMALL SPILLS:MOP UP ON WASTE TOWELING &
DISPOSE OF IN A PROPER CONTAINER; LARGE SPILLS:FLUSH TO SEWER WITH
PLENTY OF WATER.
Neutralizing Agent:SODA ASH OR LIME

Handling

Handling and Storage Precautions:AVOID BREATHING FUMES.WEAR APPROPRIATE
PROTECTIVE CLOTHING.

Exposure Controls

Respiratory Protection:IF TLV IS EXCEEDED, USE NIOSH/MSHA APPROVED
RESPIRATOR.
Ventilation:NORMAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:EYE WASH FACILITY; SAFETY SHOWER; REMOVE ALL
CONTAMINATED CLOTHING & SHOES. WASH BEFORE REUSE.
Work Hygienic Practices:WASH BEFORE EAT/DRINK.
Supplemental Safety and Health
THIS M.S.D.S IS FOR MANUFACTURER'S CATLOG NUMBERS: DA2121S, DA2121.
ALSO, MANUFACTURER'S CODE NUMBER IS: 36178B/1. PART B IS THE
CORROSIVE PART OF THE KIT.

Chemical Properties

HCC:C1
Boiling Pt:B.P. Text:212F,100C
Spec Gravity:1.213
pH:2.98
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR,COLORLESS,NO ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES;STRONG OXIDIZING/REDUCING AGENTS.
Stability Condition to Avoid:NOT KNOWN
Hazardous Decomposition Products:NOT KNOWN

Disposal

Waste Disposal Methods:COMPLY WITH FEDERAL,STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.